|
|
Preservative systems for natural cosmetics
Koblasová, Dana ; Veselá, Mária (referee) ; Zemanová, Jana (advisor)
The aim of this bachelor thesis is to evaluate the antimicrobial activity of naturally derived preservatives against selected microorganisms. Theoretical part is focused on description of the most used natural, naturally derived and synthetic preservatives, on the safety of preservatives and finally, the issue of contamination of cosmetic products by microorganisms. In experimental part, antimicrobial activity of 4 naturally derived preservatives was evaluated against selected microorganisms, which were bacteria Micrococcus luteus, Kocuria rosea, Bacillus cereus, Bacillus subtilis, Serratia marcescens and one yeast Candida vini. The tested preservatives were from MinaSolve company - E-LEEN Green A, which contains pentylene glycol and phenylpropanol, E-LEEN Green OR, which is composed of citrus extracts, citric acid, ascorbic acid and pentylene glycol, Green B, which contains benzoic acid, sodium benzoate and pentylene glycol and Hexam+, which is a mixture of pentylene glycol and hexamidin diisethionate. Antimicrobial activity was evaluated by agar diffusion method. The highest antimicrobial activity showed Hexam+, the lowest E-LEEN Green OR. E-LEEN Green A and Green B did not show any antimicrobial activity against any microorganism in the 1% tested concentration. The measured values of the inhibition zones show that the most resistant microorganisms from all the tested in this thesis are Bacillus cereus and Bacillus subtilis and the least resistant are Micrococcus luteus and Kocuria rosea.
|
|
|
Hair as a bioindicator of contamination of risk metals
Zmijová, Marie ; Řezáčová, Veronika (referee) ; Zlámalová Gargošová, Helena (advisor)
The use of hair as a bioindicator of environmental contamination by risk elements is becoming more and more common. This bachelor thesis deals with the use of this matrix for analysis using the voltammetric method. It focuses on the optimization of the method for determining the concentration of cadmium, copper, lead and zinc in real hair samples and monitors the effects on the incorporation of these elements into the hair fiber. The presence of zinc and copper was confirmed in all samples analyzed. Cadmium could only be quantified in one sample. The effect of gender and age on the concentration of elements has not been demonstrated. Concentration of lead has been linked to smoking, with higher concentrations found in smoker’s hair than in non-smoker’s.
|
|
|
Assessmant of surfactants levels in waters
Zajícová, Markéta ; Doležalová Weissmannová, Helena (referee) ; Vávrová, Milada (advisor)
The present Bachelor Thesis deals with problem of water contamination by synthetic surfactants. Surfactants represent the main component of washing and cleaning agents, from which they enter waste waters. The goal of Thesis was to monitor and evaluate volume of surfactants in waste waters from waste water treatment plant VFU Brno. Samples were being taken in the course of 7 days and we have monitored volume of anionic and cationic tensides in samples from influent and effluent stream of waste water treatment plant. For qualitative and quantitative determination were used mobile analytic measurement devices with photometric detection by company Merck. Results were processed and interpreted in data evaluation section in the end of this Bachelor Thesis.
|
|
|
Pollutants in laboratory waste waters
Červenka, Jiří ; Zmrzlý, Martin (referee) ; Sponar, Jan (advisor)
Mercury is a very consequential pollutant. It´s contained in all components of environment. Analysis of mercury is very demanding. Since mercury is ranked among dangerous chemicals, its quantity is limited and checked not only in environment. The aim of this thesis was to determine concentration of mercury in water from labs and in influent and effluent water from neutralization station of Brno university of Technology, Faculty of Chemistry. Water from neutralization is also mixed with sewage. Advanced mercury spectrometer AMA 254 was used or analysis. Results confirmed, that water flows out from lab to neutralization with relatively high concentration of mercury, highly exceeding limits of drainline. Water from neutralizing station also doesn´t show so high concentration of mercury, because it is mixed with waters from other labs and pH of water is amended. Special waste bottles for liquid waste with risk elements and dangerous compounds are available; from results can be decided, that not everybody follows the rules and some people might pour the waste right in to the sink. Resolution could have been safer acquisitions in labs. Students, who manipulate with dangerous chemicals should be alive to risk, which threatens with pouring into the sink, contamination and dangerous for all components of environment.
|
|
|
Chromium and chromium species cycle in environment
Nevrlá, Jana ; Sommer, Lumír (referee) ; Dočekalová, Hana (advisor)
This work focuses in the first theoretical part mainly on the possibility of entering various forms of chromium into the environment, their accumulation and transformation in environmental compartments. There are also described methods of sampling for analytical determination of chromium, the type of treatment of these samples and the most analytical methodologies for the determination of chromium in the oxidation stage III and VI. The experimental part is focused on the quantitative determination of Cr(III) and Cr(VI) in waste water, taken from the neutralizatoin station of the Chemical faculty of Brno University of Technology, by using selected spectrophotometric methods and the obtained results are compared with the results of analytical determination of total chromium by atomic absorption spectrometry.
|
|
|
Persistent Organic Pollutants in the Environment of the Southern Moravia Region
Lána, Radim ; Kráčmar, Stanislav (referee) ; Večeřa, Zbyněk (referee) ; Hajšlová, Jana (referee) ; Vávrová, Milada (advisor)
Byla provedena studie bioakumulace POP v potravním řetězci a historických trendů hladin POP v sedimentech Brněnské přehrady. Současné úrovně kontaminantů byly stanoveny v jelci tloušti z řeky Svratky a rovněž byla posouzena hygienická kvalita ryb z rekreačního rybolovu. Současné úrovně POP v terestrickém ekosystému byly posouzeny pomocí analýz jehličí jako přirozeného indikátoru znečištění. Studium jedinců tří druhů dravých ptáků z ČR bylo zaměřeno na zhodnocení kontaminace těchto vrcholných predátorů POP. S pomocí analýz vybraných druhů ryb ze Záhlinických rybníků byl rovněž studován proces bioakumulace. Posouzení parametrů dvou moderních extrakčních technik a jejich využitelnosti pro izolaci POP z různých matric bylo námětem poslední části dizertace.
|
|
|
Presence of heavy metals in vicinity of the roads in Brno
Brzobohatý, Jan ; Adamec, Vladimír (referee) ; Doležalová Weissmannová, Helena (advisor)
Diploma thesis deals with the risk assessment of metals in soils near roads in the city of Brno. For samples collection has been chosen twenty-five localities which were divided into five groups depending on the traffic load, in order to compare the impact of transport on the risk of soil contamination with metals. In the soil samples were determined levels of six hazardous metals (Cd, Hg, Pb, Zn, Ni, Cu). Lead, zinc, nickel and copper were determined by the flame atomic absorption spectrometry (F-AAS), cadmium by the electrotermic atomic absorption spectrometry (ET-AAS) and mercury by the advanced mercury analyzer AMA 254.
|
|
|
The effect of lubricant contamination and degradation on lubricating film behavior
Strnad, Jan ; Dzimko, Marián (referee) ; Omasta, Milan (advisor)
Lubrication contamination and degradation is one of the major causes of unexpected failure of tribological nodes. As a result, different levels of maintenance are introduced in practice, leading to a longer service life of the lubricated node. These systems often include sophisticated on-line diagnostic tools that can be used to evaluate a sample of a lubricant using certain variables such as viscosity, number of particles, humidity, dielectric constant, etc. Based on changes of these variables some systems can make corrective measures such as filtering or complete replacement of lubricant. Therefore, the aim of this experimental thesis is to determine the influence of lubrication contamination (solid particles, moisture) and degradation (oxidation) on the lubricating film behavior with respect to its limit bearing capacity. To examine the thickness of the lubricating film, friction and wear, an optical and MTM tribometer, in the ball-on-disc configuration, was used.
|
|
|
Influence of the grease aging to its behavior in the vicinity of the elastohydrodynamic contact
Navrátil, Marek ; Dzimko, Marián (referee) ; Košťál, David (advisor)
This thesis aims to describe the differences in grease behaviour caused by degradation. Observation of EHL contact and its surroundings is done using optical fluorescence, which allows to measure lubricant thickness even if it is discontinuous and air is present. New grease is observed, along with samples aged in bearings. One sample was worked for 1000 hours, which was the planned duration of the experiment. Two other samples were stopped prematurely after approx. 900 hours. Several possible age-related factors were examined and strong link between contamination and grease behaviour was found. In observed cases, contamination was identified to be the leading cause of lubricant shortage near EHL contact, which is one of possible bearing failure causes. The results expand existing knowledge about grease lubrication topic, but much further research is needed.
|
|
|
Growth of 3D Structures Induced by Electron Beam on Ceramic Substrates
Bukvišová, Kristýna ; Čechal, Jan (referee) ; Salamon, David (advisor)
Vystaví-li se vzorek působení elektronového svazku, dojde na jeho povrchu ke strukturním změnám. Jednou z těchto změn je vertikální růst 3D struktur na keramických materiálech. V práci jsou zkoumány podmínky nutné pro takový proces. Nárůst teploty často zapříčiní povrchové změny, proto je v práci proveden výpočet ohřevu materiálu elektronovým svazkem. Dále je zkoumán vliv různých parametrů svazku na růst 3D struktur, závislost objemu a rozměrů je analyzována pomocí AFM. Výsledný odhad nárůstu teploty se pohybuje v řádech jednotek, maximálně desítek K. Výrazný objemový růst je pozorován pro nízká urychlovací napětí a malé proudy. Výška vzniklých struktur dosahuje 100 nm za minutu a je nepřímo úměrná velikosti proudu.
|
guest ::
